Help on micrometer quiz?

Posted on 2015-09-08 05:58:00 in Engineering by JAKE

So my machine tool technology teacher gave us a take home quiz that we need to use our books on, problem is my book hasnt come in the mail yet. Please help.

1) The science that deals with systems of measurement is called____.
2) lines representing the divisions on a rule are called______.
3) The _____ micrometer will accurately measure countersunk holes.
4) The ______ micrometer has a pointed spindle and a double-V anvil.
5) The range of a _____ micrometer can be extended by fitting longer rods to the micrometer head.
6) A micrometer_____ measures the depths of holes, slots, and projections.
7) a ______ is used to rotate the spindle on a micrometer.
8) a friction _____ may be built into the upper section of the thimble, allowing one handed use of the micrometer.
9) ______ is the technique used for determining how many randomly selected pieces must be checked to ensure satisfactory quality and adherence to specifications.
10) the _____ snap gauge measures the amount of variation in the part measurement.
11) change in pressure is measured by a dial indicator, a cork floating on the airstream, or by a _______.
12) a microinch is ______ part of a standard inch.
13) a micrometer is ______ part of a meter.
14) a double end plug gauge has two gauging members known as ______ plugs.
15) the GO plug is made _____ than the NO GO plug.
16) the NO GO plug is _____ than the GO plug.
17) A ring gauge is employed to check whether _____ diameters are within specified tolerances.

---

Answer Comment

No Answers Posted Yet.